, please spend more than £50Description
Air Source Heat Pump – Air To Water AquaThermica for Domestic Hot Water
The TESY AquaThermica is a wall hung Compact Air Source Heat Pump for generating hot water for domestic hot water. The TESY COMPACT AquaThermica incorporates a built in air source heat pump and 100 litre hot water cylnder to offer one compact appliance that is designed to be installed in your property. It has a capacity of 100 litres of water and offers a maximum water temperature of 60 degrees. The appliance has an efficiency rating of A+ making it one of the most efficient water heaters in its class. It is powered by a single phase 230v power supply that is wired via a fused spur.
The heat pump requires connection of 125mm diameter intake and exhaust air hoses, that connect to the top of the appliance.
The Compact AquaThermica offers a state-of-the-art, compact solution to creating energy efficient hot water for domestic hot water. It is an environmentally friendly product, o
perating with renewable energy sources resulting in lower CO2 emissions. The appliance is highly efficient with a precisely balanced refrigerant cycle due to an electronically commutated motor and an electronic expansion valve resulting in 75% lower electricity consumption when compared to similar sized electric hot water cylinders.
The appliance includes a user friendly programmable LCD touch control screen and a built in diagnostics control system.
Exhaust and Intake Hoses Not Included – 125mm diameter.
IMPORTANT: This appliance must be installed in accordance with G3 un-vented hot water regulations and requires 2 forms of safety device to be installed on the hot side of the pipework. We recommend installing an 8 litre safety expansion vessel £34.99 and a 3.5 bar pressure release valve £14.99. If you have any technical questions prior to buying on eBay please call 0161 439 1400.
Specification
| Maximum working pressure | 8 bar |
| Energy class | A+ |
| Diameter | 520 mm |
| Maximum operational temperature |
60 °C |
| Capacity | 100 L |
| Thermo pocket | x1 pieces |
| Heating time | 7:04 h:min |
| Declared load profile | M |
| Insulation (rigid PU) | 50 mm |
| Electric heating element power | 1.5 kW |
| HP maximum absorption | 0.663 + 1.5 (e-heater) = 2.163 kW |
| Min. ÷ max temperature heat pump air intake (90% R.H.) | -5 ÷ 43 °C |
| Frequency | 50 Hz |
| Annual electricity consumption in kWh under average climate conditions | 1237.7 kWh |
| Power supply | 230 V |
| Compressor | Rotary |
| Min. ÷ max temperature installation site | -10 ÷ 43 °C |
| Compressor protection | Thermal circuit breaker with automatic reset |
| Refrigernt Charge | 760 g |
| Thermodynamic circuit protection type | Safety pressure switch with automatic reset |
| CO2 Equivalent | 0.480 |
| Fan | Centrifugal |
| HP Maximum settable temperature | 60 °C |
| Internal protection | Single safety thermostat with manual reset on a resistive element |
| Refrigerant | R513 a |
| Max. pressure head available | 50 Pa |
| Motor protection | Internal thermal circuit breaker with automatic reset |
| Condenser | Wrapped externally not in contact with water |
| Transport weight | 110 kg |
| Sound power Lw (A) | 53 dB(A) |
| Automatic anti-Legionnella disinfection cycle | YES |
| Height | 1351 mm |
| Minimum height of the premise | 220 mm from ceiling |
| Cathodic protection | Mg anode Ø 32 x 400 mm |
| Defrosting | 4-way valve |
| CoP (DHW) | 2.8 |
| Heat Pump Thermal Power yield (P rated) | 1.2 kW |
| Maximum legnth of pipe | 4 meters |
This item must be installed by a qualified installer.
